Skip to main content

Enabling Auto Play in Elysium

How to Enable Auto Play


In this Article we’re going to show how to Enable Auto Play in Elysium Kodi Add-on. While focusing on Elysium, there are many other Add-ons also use Auto Play. Placenta, Death Streams, Fantastic, Rebirth just to name a few.

Why should I use Auto Play ?


You can use Auto Play for many different reasons. Keep the kids busy watching their favorite TV Show by watching  the whole series of episodes. Maybe you want to catch up on a series before the new season starts Game of Thrones, The Walking Dead are just a few examples. Or maybe you just want to watch curl up on the couch and “Binge Watch”  your favorite TV Show on Auto Play.



ELYSIUM


auto play



ELYSIUM

Enabling Auto Play in Elysium as seen in the photo, is very easy.



  1. After opening the Add-on, Select Tools.

  2. Go to Playback

  3. In Default action, click the up or down Arrow until Autoplay appears.

  4. Select OK before exiting to lock in the changes you have made.


 

auto play



Setting Auto Play for an Entire Season

This is where Auto Play comes in handy for “Binge Watching” or keeping the Kids occupied on a rainy day. Big Bang Theory – Season 10 – Episode 1 was selected as the example, and as shown in the side by side photo, the context menu of Covenant (now called Placenta) and Elysium are very similar.

To bring up the context menu, hover over the Season/Episode of the TV Show (Red A.). Right Click if using a Mouse. Select the C key if using a keyboard. Press the button on the remote with 3 lines. The context menu will appear, scroll down to Play from here. (Red B.) The Add-on will now search for the best source link and will begin to play automatically. All that’s left for you to do is sit back, relax and enjoy.


 



 

 

auto play


The search progress bar will appear looking for the next episode as soon as the previous one ends. All done without you or the kids lifting a finger.


auto play



The Results

As you can clearly see, Season 10 Episode 2 has started thanks to this great option.  Which makes it extremely easy for our technically challenged friends or those who just want to jump right into streaming.



IN CONCLUSION


One of the most under used features in most Kodi Add-ons is enabling auto play.  A useful option if you want to catch up on an old series or use it as a refresher for the upcoming new season about to air. Maybe you missed the last few episodes a Reality TV show like Survivor or Amazing Race. Instead of doing a manual search for each missed episode, simply enable Auto Play.


We hope this article helped provide you with a great new skill; however, if you have any questions we are here to help.  Please feel free to join us in the Forum if you have any further questions http://ares-project.uk.

Comments

Post a Comment

Trending Posts...

Using TMDb and Alluc API Codes in Kodi Add-ons

Using TMDb / Alluc Codes Together Before explaining how to link your TMDb api code with Alluc code, why does anyone need the code ? When the Add-on Elysium became the “go to” add-on as an alternative to Covenant, the Devs added the api Code. Consequently TMDb began cancelling each new api code generated by the Developers as it was viewed as “abuse of the code”.  As a result the Developers spent more time generating a new code instead of improving the add-on itself. The Solution was to allow each user to generate their own personal IMDb Api code and enter it themselves. Generating your own TMDb Code While other groups were providing a solution, Ares Project Forum had taken it a step further by providing a Blog that gave a more detailed method that others had missed. In addition to generating a TMDb code, you will also need a Alluc code. This can be found by following this link . Add-ons Currently Utilizing both Codes The above list will be updated as ...
Post a Comment
Read more

WiFi Settings & Tweaks for Kodi

I thought I’d cover the one of the most talked about issues in the world of streaming and thats WiFi and how to get the best out of it, practical measures and not some of the voodoo you read on some forums! What is WIFi? The term Wi-Fi refers specifically to the IEEE 802.11 set of standards for wireless networks. Several different standards are designated by a letter suffix on the 802.11, such as in 802.11g or 802.11n. In general all of the 802.11 standards operate on either a 2.4GHz or 5GHz radio frequency. 5GHz has much greater speed capability but a reduced range; generally speaking the lower a frequency the further it will travel, so don’t expect miracles if you switch to 5GHz. A key thing to note here is that if ANY device uses the older “b” standard then ALL devices *could* have their speed reduced to 11mbps on “g” networks, depending on your router. This really applies to older equipment or cheap equipment with old parts used in it *cough* t...
Post a Comment
Read more

Updating Your Add-ons and Repositories in Kodi

Updating Add-ons / Repositories Updating your list of Add-ons and Repositories is the best way to ensure Kodi is functioning properly. Rather than checking, many newcomers think it’s better to just Uninstall the Add-on/Repo and reinstall it again. Totally unnecessary for many reasons. Consider this, if your vehicle runs out of fuel, would you replace it with another of the same make and model ? Of course not, you would find a way to fill it with fuel and carry on. Therefore, updating the Add-ons/Repos is like refueling your vehicle. This is another topic in our continuing effort to help the newcomers/beginners to the world of Kodi. You can view many more Blogs on a wide assortment of helpful topics here at Ares-Project Blog . Updating Repositories Rather than send an update for a single add-on that may be in a repo, the Dev will send one for the entire repo. It faster, more convenient and above all it saves time. Yet how do you know if your repo is up to date? Here are two exampl...
Post a Comment
Read more

Utilizing Alluc.ee in Add-ons for Kodi

This article will show you how to take advantage of the benefits of using a Alluc.ee Account in the Kodi Add-ons Elysium, Placenta, Death Streams and Rebirth. These are just some of the many add-ons for Movies and TV Shows available and are quite easy to navigate. What is Alluc.ee? First off, let’s take a look at what Alluc.ee is about.  Here is a brief description of Alluc.ee  and how you can take advantage of what it has to offer: “Alluc.ee (pronounced: “all-you-see”) is a user-generated link-sharing-website that catalogs links to TV shows, movies, music videos, sport, anime and cartoons. Alluc does not host any content itself. Alluc.ee also does not contain any download links, all are links to streaming video sharing websites. Users provide the links in the right category and they are released to the site after having been checked by the administrators. Video hosting sites that are linked include YouTube, Dailymotion, and Veoh, among others....
Post a Comment
Read more

Kodi Dlna Client and Server Setup for Krypton

What is Dlna ? WHAT IS DLNA? The term DLNA stands for “Digital Living Network Alliance”. It is the industry standard for sharing network data combined with “Universal Plug and Play Audio Visual(UPnP). This option can be used to share your media libraries from one device to another. If you have a PC or Kodi Box for your Tv, you can share its media contents.  Other Smart TVs, Game Consoles, Phones, etc. to name a few. It is recommended that you backup Kodi before continuing in case you wish to restore your Kodi settings at a later date. A Kodi UPnP server/media can stream its content to other devices on the same network by using UPnP and DLNA protocols. HOW TO ENABLE DLNA ON KODI? For this article, I used a clean version of Krypton 17.6. If you are using a Build, this is typically found by selecting System, then System again. Lets begin: After opening Kodi, select the Cog Icon found in the top left corner. Then Select Service Settings top row far right in...
Post a Comment
Read more