Using TMDb and Alluc API Codes in Kodi Add-ons

Using TMDb / Alluc Codes Together

Before explaining how to link your TMDb api code with Alluc code, why does anyone need the code ?

When the Add-on Elysium became the “go to” add-on as an alternative to Covenant, the Devs added the api Code. Consequently TMDb began cancelling each new api code generated by the Developers as it was viewed as “abuse of the code”. As a result the Developers spent more time generating a new code instead of improving the add-on itself. The Solution was to allow each user to generate their own personal IMDb Api code and enter it themselves.

Generating your own TMDb Code

While other groups were providing a solution, Ares Project Forum had taken it a step further by providing a Blog that gave a more detailed method that others had missed. In addition to generating a TMDb code, you will also need a Alluc code. This can be found by following this link.

Add-ons Currently Utilizing both Codes

The above list will be updated as each new Add-on allows the use of either/both Codes.

Adding Codes in Elysium

Elysium requires a bit more work but it is really quite easy.

Open Elysium, select Tools.

Settings-Accounts.

Enable Alluc Sources (click anywhere in that area)

Enter the User Name you used when you joined Alluc.ee.

Enter Password you used when you joined Alluc.ee.

Enable Alluc Debrid Sources , Skip this step if you do not have a Real Debrid Account(click anywhere in that area)

Enter the TMDB API Code (key) you generated.

Select OK before exiting, failure to do so will not set the new changes. You will have to repeat all steps.

Adding Codes in Death Streams

If you haven’t noticed, S.A.L.T.S. is now a Fork and it’s called Death Streams. Follow this Link on how to optimize the settings.

Open the Add-on.

Select Settings.

Select Add-on settings.

Scroll to the right to Scrapers 1.

Enable, if not already done, alluc.com Enabled.

Enter both the Username and Password you used to join that site.

Select OK before exiting.

Adding Codes in Rebirth

Rebirth is a new Fork of Exodus, can be found in the Cyberlocker repository. Follow this link for more information.

Open the Add-on and select Tools.

Select Providers.

Select NanScraper Settings. If you have a Real Debrid Account, click to enable it. See A above.

Scroll down to Scrapers 1, See B above.

Click on Enabled.

Enter your Username and Password.

Click OK to set the changes when exiting.

IN CONCLUSION

In conclusion, more Add-ons will be using the API Code/Key in the near future, knowing how to accomplish this now will make it much easier for you when these do happen. Due to different scrapers used in each Add-ons, your results may vary. All testing and research was conducted on a PC with both Krypton 17.4 and Jarvis 16.1.

In addition, testing was also done on a Nvidea Shield using a SPMC 17.4 Fork, Krypton 17.5.1 and NODI Krypton fork. These produced positive results as well. Finally, this article is meant to be used as a guide. Your results will produce different results, ensuring your add-ons are up to date will help. If you have any questions concerning this topic or any others, join us in Ares Project Forum. It’s Free to Join and our knowledgeable staff are always available to help. http://www.best-kodi-guides.eu/disclaimer/

Comments

Kodi Dlna Client and Server Setup for Krypton

What is Dlna ? WHAT IS DLNA? The term DLNA stands for “Digital Living Network Alliance”. It is the industry standard for sharing network data combined with “Universal Plug and Play Audio Visual(UPnP). This option can be used to share your media libraries from one device to another. If you have a PC or Kodi Box for your Tv, you can share its media contents. Other Smart TVs, Game Consoles, Phones, etc. to name a few. It is recommended that you backup Kodi before continuing in case you wish to restore your Kodi settings at a later date. A Kodi UPnP server/media can stream its content to other devices on the same network by using UPnP and DLNA protocols. HOW TO ENABLE DLNA ON KODI? For this article, I used a clean version of Krypton 17.6. If you are using a Build, this is typically found by selecting System, then System again. Lets begin: After opening Kodi, select the Cog Icon found in the top left corner. Then Select Service Settings top row far right in Systems as shown in the ph

How to enable Inputstream Adaptive in Kodi Krypton

What is Inputstream Adaptive The recent update release from Kodi on the Krypton 17.3 has failed to enable a feature called InputStream Adaptive. So what you say ! What does it do ? How do I use it ? Well here’s a quick explanation of what InputStream Adaptive does : This package is required to allow add-ons like the Youtube to work properly in Krypton 17 . Therefore allowing the add-on to support 1080p resolutions and up and solve some issues with mpeg-dash videos. The following steps can be used in Krypton 17.3 as well as any Krypton Forks Nodi, MyGica Media and SPMC v17.4-alpha 10. Because the add-on is pre-installed in Kodi Krypton, it a simple matter of knowing where to locate it, and then enable. After opening Kodi, hover the cursor over the Add-ons tab in the vertical menu bar to your left . Red Arrow 1. Then select the My add-ons icon at the top of the screen. Red arrow 2. Enabling Inputstream Adaptive Scroll down to the bottom of the list of Add-ons and select VideoPlayer Input

Project Cypher

This is an add on thats been around for a while, with a mix of content, mostly that I haven’t used to be honest, but its recently started to produce some good live streams with I think makes it worthy of recommending. I worked through some of the content this morning and there is a mix of stuff, but of real interest to me personally is the quality of the live links. The other content such as Lingerie Football and Lingerie Fighting is unique to the add on (AFAIK), plus there plenty of horror under the “dark side” link and Serial Killer content too, should that be your thing. Installing Project Cypher Click File Manager Double Click Add source Type this EXACTLY http://repo.run/cypherrepo/ Name the source, Project Cypher Return to the Kodi Home Screen Click System Click Add ons Click install from zip file Click Project Cypher Source Click Project Cypher zip file Wait for “add on enabled” notification Project Cypher Content The long list of live sports links are hidden the test area,

Making Adjustments While Watching Movies in Kodi: Aeon Nox Silvo Skin

Adjusting options to screening is quite easy to do inside the Aeon Nox Silvo Skin and some are unaware of all the items you can change. Many of you have asked questions on where to make Screen Adjustments re: Calibration, as well as how to Add or Remove Subtitles (myself included). So here we go, the above Photo and the next used for this FAQ were taken from the Ares US Build Jarvis Version. The movies selected was “Jackie” from the Elysium Add-on with a Real Debrid Account. Adjusting/Removing English Subtitles You begin watching a Movie and then English subtitles appear at the bottom, yet the the movie is in English! Step 1. – To remove the Subtitles, move the cursor to the top of the screen to open the list of adjustments. Step 2. – Select the Speaker Icon as indicated by the Red Arrow in Photo A. Step 3. – A new window will appear, scroll down to Enable subtitles as seen in Photo B. Step 4. – Simply click anywhere in the highlighted area to disable.( blue light will be gone once

Kodi and Streaming Guides

Search This Blog